Perimeter lighting or strip lighting follows the outer edge of your pool with side-emitting fibre optic cables. The side-emitting cables are chlorine-resistant and salt-water resistant ensuring no degeneration. Unlike LED strip lighting fibre optic side-emitting cables contain no LEDs and are not affected by the pools heating. This allows for fully submergible installations of depths deeper than 1.5m.
An IP43 rated illuminator supplied in the kit can be stored indoors or outdoors. It is made of stainless steel 304 construction and requires a standard 10 amp power socket for its power.
The fibre cables are fitted on a clear track and secured under the coping or in a channel along the wall of the pool. Both ends of the fibre cable loop back into the illuminator creating a stronger light intensity and better performance.
After installation, watch the water attractively diffuse the colour emanating from the fibres, transforming the water into an inviting and appealing haven for relaxation or exercise.
The illuminator via the optional DMX module can integrate with home automation systems such as Dynalite, Cbus, Control4 and other RS232 and serial protocols.
Pool kit components: - 80 watt LED illuminator - Wireless remote - Side emitting fibre cable - Clear plastic tracking - Stainless steel 5/8 screws - 5mm wall plugs
If you require a customised solution or installation contact LightEFX on 1300 762 299. LightEFX provides upgrade services existing fibre optic or LED strip lighting. Whether looking to replace non-working components or to upgrade to home automation.